home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1997 April
/
EnigmA AMIGA RUN 17 (1997)(G.R. Edizioni)(IT)[!][issue 1997-04][EAR-CD].iso
/
EARCD
/
comm
/
cnet
/
viewlog.readme
< prev
next >
Wrap
Text File
|
1996-12-07
|
8KB
|
150 lines
Short: View Log Manager for CNet Amiga 4.23+!
Author: dotoran@bluemoon.net (david weeks)
Uploader: dotoran@bluemoon.net (david weeks)
Version: 5.01
Type: comm/cnet
Replace: aminet/comm/cnet/viewlog.lha aminet/comm/cnet/viewlog40.lzh
Requires: AmigaOS 2/3.x, CNet Amiga, v4.23+
Distribution: anywhere, everywhere, please mirror!
ViewLog, v5.01 is an update to correct some corrupted characters that were
in some v5.00 command files, which caused them not to be usable.
ViewLog, v5.00 was completely rewritten from the ground up to be much
more powerful than previous versions. This version of ViewLog was written
for use with the latest versions of CNet Amiga(v4.22 as of this writing),
and will NOT function on earlier versions. (Grab a copy of ViewLog, v4.1 if
you'd like to use this on a v3.05c CNet version)
What ViewLog does is to read how you have your current logs setup(in the
CNet Config program), then additionally goes into your "SysData:Log/" path
and looks there for any OTHER logs you may have set up. It then adds these
logs to it's config file, so that you can edit them further.
For each log scanned in, the following can be done to each:
- You can specify an Access Group Range for each log, which determines
which, if any, users on your bbs can view the log.
- You can choose to trim the log yourself, or to let automaintenance
do it.
- You can specify how LONG each log should be(in lines) after it has
been trimmed.
- You can optionally specify if a log should have a "history" kept on
it. This history will contain all previously trimmed portions of the
original log file.
- You can specify how LONG each log HISTORY should be(again, in lines)
after it has been trimmed.
- You can create a "header" for each log, which makes it a bit easier
to figure out what the info in each log MEANS.
- You can set a "Master SysOp" flag, which means only the SysOp holding
ID number 1 can trim or delete a log or history file.
The USER Version of ViewLog will list ONLY those logs THAT user has
access to reading. Depending on the user's terminal settings, they will
have the ability to use an ANSI selection method, or an ASCII menu system.
The SYSOP Version of ViewLog allows the SysOp to view logs and histories,
trim any log/history, delete any log/history, launch the config, maint, or
amaint modules, as well as various other goodies! :-)
Used in conjunction with my AnsiRead Program, the users and sysops also
have the full power to search, count, mark and save text, and easily move
around within each log file. If you don't already have AnsiRead, then I
HIGHLY suggest getting a copy of this file for use with ViewLog, v5.00!
=== v5.00 ===
- Release Date: October 2, 1996!
- This version SPECIFICALLY written for v4.23 CNet Amiga, and will NOT
run on earlier 4.xx versions, NOR will it run on v3.05c. SysOps till
using v3.05c will have to continue using the 4.1 version ViewLog.
- Those bugs I could remember in the BETA version were removed, and the
following additional changes were also made:
- The "ViewLog5.cfg" file is now stored directly in the "ViewLog5/"
directory, and it is now possible to store this directory ANYWHERE
on your system you so wish.
- The CONFIG program was modified:
- The "Command Path" was removed, as it is no longer needed.
- Toggles for AnsiRead usage in both the LF and VL modules were
included.
- A complete path/filename are now asked for the LOCATION of the
AnsiRead program IF you'll be using it.
- The AMAINT program received some corrections, notably where it
saw instances of your first defined log(in the VL_Data) file as
being NEW. The output of this file, while it is running, was also
modified to more adequately describe what it is doing.
- The MAINT program needed certain modifications to it's getuser
values in order to correctly read your log values from CNet's
memory structures. The "Q" command was also fixed.
- The USERLOG viewer received the enhanced AnsiRead calls, as well
as the "smart" path changes.
- The SYSOPLOG viewer received the same changes as were made to the
USERLOG, and additionally:
- The "A" command was not working.
- History files were being corrupted during trimming operations.
- The colors used for displaying the names of the logs were not
being reset properly when the "ALL" menu receeded off the top
of the screen.
- A few additional confirmation requests were added in areas
where they were lacking.
- The amigaguide doc file was updated to include info on suggested
log usage, as well as having it's BETA notes removed. This HISTORY
file was also included.
=== v4.90 ===
- This was the BETA version 5.00, released February 20, 1996 to only a
handful of users. Written for the first release of CNet, v4.xx by Ken
Pletzer, this file was started completely from scratch, as there were
some specific NEW features I wanted to see added:
- You can now specify ACCESS GROUP RANGES for each log to be used
in the determination of who exactly gets to see each log.
- Separate group ranges, as well as a "master" control were also
added to determine who has the ability to perform maintenance on
each log.
- The logs can now be TRIMMED, or shortened to a specified number
of lines, again where each log can have it's own trim value.
- If you so choose, each log can also have a "history" file created
from the "trimmings" of the above operation. You can also specify
the length you wish each history file to be.
- A new ANSI (and Ascii) screen display has been added for the User
Log, so that ALL users can view logs.
- A superior SysOp ViewLog module was also included.
- A companion program, AnsiRead, is highly suggested to be used in
conjunction with ViewLog. This AnsiRead program is used in the
display of the logs and offers MANY commands for manipulating the
log, searching for text strings, enabling/disabling interpretation
of ANSI/MCI codes and MUCH, MUCH more.
- The main README file was converted to AmigaGuide for more ease of
use, as well as receiving "enhancements" for those using the 3.1
operating systems.
- A "title" bar can also be created for each log, which is useful
in figuring out what the DATA in a log means.
-- Written by Dotoran of Frontiers --
============================= Archive contents =============================
Original Packed Ratio Date Time Name
-------- ------- ----- --------- -------- -------------
1030 467 54.6% 01-Oct-96 13:59:12 +!Frontiers
52168 18209 65.0% 03-Nov-96 11:16:32 +ViewLog5.guide
9130 3774 58.6% 03-Nov-96 11:15:36 +ViewLog5.history
5572 1996 64.1% 03-Nov-96 11:11:42 +VL_AMaint
12199 4064 66.6% 03-Nov-96 11:12:02 +VL_Config
14050 4678 66.7% 03-Nov-96 11:12:24 +VL_Maint
19982 5454 72.7% 03-Nov-96 11:12:46 +VL_SysOpLog
3164 974 69.2% 03-Nov-96 11:14:10 +VL_Titles
9862 3672 62.7% 03-Nov-96 11:09:36 +VL_UserLog
77 77 0.0% 03-Nov-96 11:11:20 +ViewLog5.cfg
-------- ------- ----- --------- --------
127234 43365 65.9% 03-Nov-96 19:59:04 10 files